Kohler Bathroom Sink Stopper Parts

Kohler is a well-known and reputable brand providing high-quality bathroom products for many years. One of their popular products is the bathroom sink stopper, an essential component of any bathroom sink. However, like any other product, over time, the Kohler bathroom sink stopper parts can wear out or break, leading to the need for a replacement. In this article, we will guide you on how to replace Kohler bathroom sink stopper parts step-by-step.

Step 1: Turn off the Water Supply

Before beginning any plumbing work, turning off the water supply to the sink is essential. The water supply valves are usually located beneath the sink. Rotate the valve clockwise until the water stops flowing to the faucet. This step ensures that you will not have any water spilling out while you work.

Step 2: Detach the Stopper

Locate the sink stopper beneath the sink. In most Kohler sinks, the stopper is attached to the sink drain using a lift rod. To detach the stopper, loosen the nut that secures the lift rod to the drain tailpiece. Once you loosen the nut, you can lift the rod out of the drain, and the stopper will come out.

Step 3: Remove the Drain

After removing the stopper, the next step is to remove the drain. To do this, use a drain key or pliers to grip the drain flange, which is the visible part of the drain that is visible from the sink. Turn the drain flange counterclockwise to unscrew it from the drain body. Once the flange is loose, you can remove it by lifting it straight up.

Step 4: Remove the Old Stopper

After removing the drain, you can remove the old stopper from the drain body. To do this, twist the stopper counterclockwise until it unscrews from the drain body. Once it is loose, you can lift the stopper straight up and out of the drain body.

Step 5: Install the New Stopper

You can now install the new Kohler bathroom sink stopper with the old stopper removed. To do this, align the stopper with the drain body and twist it clockwise until it is secure. Use a wrench to tighten the stopper until it is snug.

Step 6: Reinstall the Drain

After installing the new stopper, the next step is to reinstall the drain. Apply a thin layer of plumber’s putty to the underside of the flange and insert it into the drain body. Turn the flange clockwise to tighten it, and wipe away any excess putty.

Step 7: Reattach the Stopper

Once the drain is reinstalled, you can reattach the stopper. Insert the lift rod into the hole in the sink and secure it to the drain tailpiece using the nut you loosened earlier. Test the stopper by lifting and lowering the lift rod a few times to ensure it moves smoothly.

Step 8: Turn on the Water Supply

With everything back in place, you can turn on the water supply to the sink. Turn the valves counterclockwise to restore the water supply, and test the sink for any leaks or drips.

Replacing Kohler bathroom sink stopper parts is a simple task you can do yourself with a few basic tools. Following the steps outlined in this guide ensures that your sink is working correctly and efficiently. Always remember to turn off the water supply before starting any plumbing work, and if you are unsure about anything, it is always best to consult a professional plumber.

Identify the Correct Bathroom Sink Stopper u2013 KOHLER

Kohler-78172-CP-Stopper-Assembly—Chrome

Standard pop-up drain, non-exposed, with lift rod

KOHLER GENUINE PART GP1035350-CP LAVATORY SINK DRAIN

Kohler 1037021-BN – Pop-Up Stopper with Plastic Stem

Sink Pop-up Drain Stopper Compatible with Kohler Part GP1035350-CP, Solid Brass Lavatory Sink Drain Assembly with Lift Rod and Overflow, Bathroom

Stopper

KOHLER Matte Black Bathroom Sink Pop Up Drain Lowes.com

Pop-up clicker drain without overflow

Bathroom Sink Popup and Stopper Problems

Kohler 1068204 Cartridge Assembly, 3.00 x 2.50 x 2.50 inches

KOHLER Polished Chrome Bathroom Decorative Sink Drain

KOHLER Brass Bathroom Sink Grid Drain without Overflow in Polished Chrome K-7129-CP

 

Related Posts: