How To Frame Bathroom Mirror With Tile

Adding a frame to a bathroom mirror is a simple way to give the room a fresh, updated look. One stylish and durable option is to use tile to frame the mirror. Here is a step-by-step guide on how to frame a bathroom mirror with tile:

Gather your materials: In addition to tiles, you will need a wet saw, tile adhesive, grout, and a grout float. You may also need a drill, screwdriver, and screws, depending on how you plan to mount the tiles.

Measure the mirror: Measure the width and height of the mirror, and use these measurements to determine the size of the tiles you will need. You may need to trim the tiles to fit the dimensions of the mirror.

Cut the tiles: Use a wet saw to cut the tiles to the appropriate size. If you are using a mosaic tile sheet, you will need to cut the sheet into individual tiles using a pair of scissors or a utility knife.

Adhere the tiles to the mirror: Spread a layer of tile adhesive onto the back of each tile, and press it firmly against the mirror. Repeat this process until the entire frame of the mirror is covered with tiles.

Let the adhesive dry: Allow the adhesive to dry according to the manufacturer’s instructions. This will typically take at least 24 hours.

Grout the tiles: Once the adhesive is dry, mix the grout according to the manufacturer’s instructions. Use a grout float to spread the grout over the tiles, making sure to fill in all the gaps between the tiles.

Wipe away excess grout: Use a damp sponge to wipe away any excess grout from the surface of the tiles.

Mount the mirror: Once the grout has dried, mount the mirror using screws or adhesive strips.

By following these steps, you can easily add a stylish and durable tile frame to your bathroom mirror. This simple update can give the room a fresh, modern look, and the tiles will provide a long-lasting and durable finish.