How To Fix A Moen Bathroom Faucet Handle

It is not uncommon for homeowners to experience issues with their Moen bathroom faucet handle as, over time, the handle may become loose and hard to turn. Fortunately, most Moen bathroom faucets have a Red-White-Blue handle configuration known as a Moen 1225B stem cartridge and are designed to be easy to replace. This article will outline the simple steps needed to replace a Moen bathroom faucet handle.

To begin, you will need to turn off the bathroom’s water supply at the main valve. Once you have done this, examine the faucet closely to locate the set-screw at the base of the handle. Use a slot screwdriver to loosen the set-screw and separate the handle from the stem. Next, use an adjustable wrench to remove the stem from the valve.

In order to replace the stem, it is important to correctly identify the stem cartridge. Most Moen bathroom faucets use stems with a red, white, and blue handle configuration. However, some faucets may have other colors. Therefore, it is important to take note of the colors when removing the stem from the valve.

Once you have identified the stem cartridge, you will need to obtain a new one. These can commonly be found at local home improvement stores or online. Once you have the new stem, simply install it in the same position as the old one. To do this, place the stem in the valve and gently turn it in the right direction until it is firmly in place. Finally, use the slotted screwdriver to secure the handle to the stem.

At this point, you can switch the main valve back on and run the faucet. Make sure the handle is secure and easily adjusts when turning on and off. If everything is functioning properly, then you have successfully completed the repair.

In conclusion, replacing a Moen bathroom faucet handle is a relatively easy job and one which you can do on your own. Just be sure to switch off the water first and accurately identify the stem cartridges before installing a new one. With the right tools and a bit of patience, you should be able to complete the repair in no time at all.